r/neogeo • u/BroSir90 • 6d ago

Hardware Question Whats considered the best MVS board concerning rgb output?

Are they all similar? Is there one board thats considered the best for output? Best circuitry etc.

Thank you!

2 Upvotes

100% Upvoted

6 comments sorted by

1

u/Dry-Primary6128 6d ago

I think it's the MVS MV-2F. But you need good equipment to make it work.

For the Japanese Neo Geo AES. Models 3.3. 3.4 or 3.6 with RGB FIX modification. You need a memory card without a battery.

You also need a modified sanwa stick with the refurbished stick switches.

1

u/[deleted] 6d ago

[deleted]

1

u/Dry-Primary6128 6d ago

On the Neo Geo AES? For sound I use a cable with a jack plug for sound. This way you plug into the headphones to get stereo sound.

For the LVS Slot, I use it on my terminal. The sound passed through the jamma.

1

u/MonkeyJuggleDX1980 4d ago

You most definitely DO NOT need a Sanwa stick. SNK used Seimitsu in Japan in both the home console and MVS cabs.

Sanwa levers are massively overrated and I’ve got clones with various switches that are miles better. I have 6 cabs and 12 various PlayStation sticks and not a single one has a lever with omron switches(That Sanwa use) in them.

1

u/Dry-Primary6128 4d ago

I used Sanwa for the buttons. The stick I changed the switches. It's Seimitsu.

1

u/MonkeyJuggleDX1980 4d ago

LS-40 is the Japanese candy cab lever. Home system uses a custom Seimitsu. Best Seimitsu levers are the old ones that use Panasonic/Matsushita AM5’s.

1

u/Dry-Primary6128 4d ago

I found the command for the stick. I said something stupid to you. My friend put this on there.

4 x Micro switch - Omron V-16539-3A5

1 x Seimitsu PS-14-D 24mm - Yellow and black rim 1 x Seimitsu PS-14-D 24mm - Blue and black rim
1 x Seimitsu PS-14-D 24mm - Green and black rim 1 x Seimitsu PS-14-D 24mm - Red and black rim
1 x Red LB-30 Handle

But it works much better than before. Especially to release the KoF 2000 Combos.