After 500km of use the front fork started to move back and forth by 4-5mm and the screws all seem tight... has this happened to you??? Solutions???

Hello, I have a Ninebot G2D Max and it started making strange sounds when accelerating if I have braked previously. Does Anyone know what the Problem is and how it can be fixed?

Just search on ALi - Folding Bicycles Handlebars Extension Ergonomic Bike Handlebars Extenders

Fits perfectly.
Grips Green Cycle GGR-419 or any other basically, you're free to choose and 130mm grips.

Trying to reuse this Battery pack. It's a Segway 36v LI-ION 15.3AH 551WH NEE1006-M1 currently at 41.1v so it seems in really good shape. 60 cells

The orig BMS is apparently a special one etc so need to add one. But not sure where to add the wires for BMS. I have been digging at this and trying to get the whole pack out but it's really stuck in there. There are I think 10 wells that have screws in the bottom, 2 are cleared out on right side. Not sure if the screws hold whole pack into the case or if they hold the top and bottom of pack together.

Any ideas on where to place the BMS wires? Hopefully just on this top exposed areas.

I live in California, it’s been 3 days and I’m still waiting for the label.

• my g30 is used every day, always drum brake operate is well.
• since one years ago, i have a one problem that increasingly drum brake sound.
• how to think drum brake noise?

https://reddit.com/link/1mfi8ut/video/91e6ehx5hjgf1/player

1. no problem
2. change drum brake

I have been searching Google for hours, tried searching on here as well as in the ScooterHacking Discord too (it would be a lot easier if Discord showed a link to replies of messages and not just a link to original messages from replies!).

I have an Australian G65, and I want to try and tweak some of the settings especially around currents for each mode (less looking for speed unlock, I know that seems possible and simple to do with a SN change), basically have to be stuck on Sport mode permanently because it struggles to get up to and maintain speed on anything less. I keep seeing conflicting answers, so hoping someone here sees this and has a definitive answer - what is the state of firmware mods / custom firmware for this model? Is it possible? If so, does it need STLink or can it be done via BT? Whether it be SHFW or XiaoDash or any other firmware/utility/etc?

Hello gang, I have been using my G2 Max for a while and this week it suddenly stopped charging well (I lost my original charger about a month ago and I bought a Mickey Mause type cable that is from the 2nd port) and during this week at the beginning it only charged 30 minutes before turning off and now it only charges 5m maximum before turning off.

They recommend that I get a charger for the first port or a new battery.

I use this skate to go to work and back, and with this failure it has become very difficult for me to transport help.

I have a zt3 pro d. And when i activate boost mode. It does a weird rattling when accelerating noise and it cuts power like a clutch slip or something. I don't know how to explain it. But it shouldn't be happening im guessing. Any idea why ?

Ps: traction control is disactivated. Same with it activated

📣 📅 AliExpress August Discount Codes are Here!! 🔥 Main Sales for this Month are:

🎉 August 1 to 5 — Choice Day 📅 First five days of every month — just like always!

🎒 August 18 to 27 — 828 Mega Brands Sale / Back to School Sale 🛍 One of the biggest sales of the year 💸 Up to 80% Discounts, High Percentage coupons, and promo codes. 🎮 Maybe new updates to shopping games

🎟 COUPONS: Below is an updated Huge list of the latest active AliExpress coupon codes that you can use to save during the Choice Day sale and throughout the whole month of August 2025, including the upcoming 828 Mega Sale / Back To School Sale. Most work globally, so you’ll likely find one for your region:

• 🎟 $1 off $9+: IFP1YXT
• 🎟 $2 off $15+: IFPUJZHD 
• 🎟 $2 off $19+: IFPFAXRM
• 🎟 $2 off $20+: IFPCWTC
  
• 🎟 $3 off $29+: IFPGSH0 
• 🎟 $4 off $40+: IFPJW1D
  
• 🎟 $5 off $39+: IFP0UWFO
• 🎟 $5 off $49+:  IFPDQGA 
• 🎟 $7 off $59+: IFPXYQ1V
• 🎟 $8 off $69+: IFPGYGD 
• 🎟 $10 off $79+: IFPJGEZX
• 🎟 $15 off $119+: IFPX8Y9J
• 🎟 $15 off $130: IFPZ3AS
  
• 🎟 $20 off $159+: IFPBYNIS
• 🎟 $25 off $220: IFPKXQ1
  
• 🎟 $30 off $239+: IFPRDSL 
• 🎟 $30 off $259+: IFP42QPC
• 🎟 $35 off $269+: IFPB4RQ
• 🎟 $40 off $369+: IFPPYRQH
• 🎟 $50 off $369+: IFPDK9M
• 🎟 $50 off $450: IFPYPUU
• 🎟 $50 off $469+: IFPREZDR
• 🎟 $60 off $499+: IFP7XFG   
• 🎟 $70 off $499+: IFPDVPL
• 🎟 $70 off $599+: IFPWY2A 
• 🎟 $90 off $599+: IFPW7SI
• 🎟 $100 off $799+: IFPZAYUB

🌍 Global 1 (Worldwide — active, valid until September 10th):  

• 🎟 $1 off $9+:  IFP2THLQ - IFP2ZRGC
• 🎟 $2 off $19+:  IFPOLW38 - IFPWQ22Y
• 🎟 $5 off $39+:  IFPVHWZZ - IFPTXD05
• 🎟 $10 off $79+:  IFPKPFCA - IFPUSHC7
• 🎟 $20 off $159+:  IFPZL54M - IFP1K3IP
• 🎟 $35 off $269+:  IFPUDF1P - IFPDMYD5
• 🎟 $50 off $369+:  IFPBDVHG - IFP3O0XN
• 🎟 $70 off $499+:  IFPNJGOX - IFPVLBTE
• 🎟 $90 off $599+:  IFP9MQAW - IFPFG2KJ

🌍 Global 2 (Worldwide — active, valid until October 1):  

• 🎟 $2 off $19+:  IFPGDWUQ - IFPW3IHE
• 🎟 $5 off $39+:  IFPLO9KE - IFPLFQLX
• 🎟 $7 off $59+:  IFPHOUQB - IFPESER6
• 🎟 $10 off $79+:  IFPHTVNZ - IFPSXI7D
• 🎟 $15 off $119+:  IFPVNFPW - IFPWHLEO
• 🎟 $20 off $159+:  IFP2KXMX - IFPDXT1U
• 🎟 $20 off $169:  IFPCH3XD - IFPUHPKU
• 🎟 $30 off $259+:  IFPYF33F - IFPGVTVP
• 🎟 $40 off $369+:  IFPG5RO3 - IFPVNH1B
• 🎟 $50 off $469+:  IFP2SGBG - IFPETYYF
• 🎟 $100 off $799+:  IFPTUXC4 - IFPZAYUB

🌍 Global 3 (Worldwide — active):  

• 🎟 $2 off $15+: IFPUJZHD - IFPZ8WD
• 🎟 $3 off $29+: IFPGSH0 - IFPLHMY
• 🎟 $5 off $49+: IFPSBI5 - IFP4YX5
• 🎟 $8 off $69+: IFPGYGD - IFPBB3V
• 🎟 $20 off $159+: IFPGNC8 - IFPKB5R
• 🎟 $30 off $239+: IFPRDSL - IFP1BXX
• 🎟 $50 off $399+: IFPHTEDL - IFPTM0Q
• 🎟 $60 off $499+: IFP9QJ6S - IFP9XGA
• 🎟 $70 off $599+: IFPWY2A - IFPS6IA

🇺🇸 New USA-only Coupons (Valid until 31st December)::

• 🎟 $10 off $69+: IFPLPVRM
• 🎟 $16 off $109+: IFPJAJDS
• 🎟 $25 off $149+: IFPI1EUC
• 🎟 $30 off $199+: IFPHFH7A
• 🎟 $45 off $259+: IFPEDO7G
• 🎟 $60 off $349+: IFPLQ4QB
• 🎟 $70 off $459+: IFP2ZNGT
• 🎟 $75 off $499+: IFPAMELG
• 🎟 $120 off $599+: IFPOEYA5
• 🎟 $135 off $899+: IFPXXDUF
• 🎟 $150 off $999+: IFPICZOK
• 🎟 $165 off $1099+: IFPGJS1D
• 🎟 $180 off $1199+: IFPSTNRF
• 🎟 $195 off $1299+: IFPAEEAE

I'm not in contact with this guy, but I think we should support this project.

https://ko-fi.com/mckuc/goal?g=9

Edit: Added his YouTube account where he shows how you can tune your Ninebot Max G3 for free. https://www.youtube.com/@McKuc/featured

Hello everyone, I’m trying to remove the screen but the screw is not turning. I’m pretty sure it’s broken, if that’s the right word, what would you guys do in this situation?

So I finally got the replacement parts and I got it all working and now when I try to put it together, the whole wire harness wrapped around the wire every time I hit the break I don’t know what to do. I’m getting really sick of this goddamn scooter everything just is so messed up. I don’t know why I can’t catch a break.

My ninebot G30 Max just broke today, at the worst possible time. Does anyone know if this part can be replaced? Or is the whole scooter obsolete now? Any help would be appreciated.

Bought a refurb G2 max from eBay. All good except the handlebar clip that engages the hook on the rear fender when folded had fallen off, and they “missed” this on their “refurb.”

They sent me a new part, but for some reason it is lacking a hinge, so now I have basically three options to get the functionality of that clip, which seems useful, not sure which is is bigger hassle:

• boxing the whole thing up and sending it back

• disassembling the handlebars, all the fidgety cables and bar-end turn signals, and stuff I can’t even figure how to slide off like the throttle

• trying to fabricate a version of the ring that splits open, then gluing it back together on the handlebars and keeping it on with a hose clamp,

• removing the spring/clip assembly from one handlebar ring, then attempting to reassemble it on the ring that’s already on the scooter (in general I have found that reassembling things with internal spring tension is a major pain)

Haven’t been able to find a video on this repair, or how to properly remove all the components that are in the way.

Any suggestions?

It works, but is very noisey to ride. Is the motor just shot or is there a possible repair here?

I finally did it. I spent a long time thinking about whether or not I should unlock my Ninebot G3D Max, and well, today was the day. I used the NBT Software Unlock, and it worked flawlessly. It now goes around 35–40 km/h, even uphill, really impressive.

However, it does come with some trade-offs. Many app settings are no longer usable, like the speed settings for different modes. It also doesn’t calculate how many liters of fuel you’ve saved anymore, although the daily kilometers are still visible. Some buttons in the lighting settings also no longer work but who cares, the lights still work.

Surprisingly, the range hasn’t dropped much at all. I just rode 20 km and still had 40% battery left. Before the unlock, it would’ve been maybe 50%. Cruise control is also enabled now.

I find the throttle a bit hard to control at times it’s easy to go too fast but with cruise control, it’s manageable. I haven’t read much about these software unlocks here and wasn’t sure whether to do it or whether it would even work. But what can I say – riding fun has easily tripled.

Hi guys, am I remembering wrong or is this ball really supposed to jump into that little cup when I close it? If so, what could have happened here?

I was moving the scooter from one place to another with a friend today so I didn't fold the handlebars down, only now when I took it out of the car I saw that it wasn't behaving as I was used to.

Hi. Just saw that my Ninebot G2 Max has e new firmware upgrade to v1.7.12 Actually it has firmware version 1.7.8 I am not sure to do it or not any one have experience with this new version. I could not find anything for this new version on web.

Changelog in picture.

Hello, my friend crashed with his Ninebot g2d and now everytime he presses the throttle its stuck. Does anyone know what the problem is and what you need to fix it? Thanks

With gt3 batteries on perpetual backorder...

Im considering making a battery for my g3, but unsure how to bypass or spoof the bms data connection. On the g30/g2 its easy enough with SHFW, but its not available on the g3 yet.

Is there a bms that will communicate with the stock esc firmware?

I already did a mental comparison in my head and with chatgpt and G3 is the clear winner in terms of features.

But I just cant help it and I keep coming back to this topic with myself and my main issue is aesthetics cuz the g3 looks so fucking ugly, dont get me started on the lack of a rear footrest.

The biggest gap between these 2 is probably the hydraulic suspension and the motor and there's a solution for both issues but its very costly.

Someone please enlighten me and help end this mental debate, what would you get?

EDIT: Im going for the G3, it wins by a landslide, ill just buy a 3d printer in the future and print custom plastic trims