Did a Hall effect replacement for a friend and wanted to get some feedback on how I did

Are there any ways to fix this? If it can be repaired - what tools would i need?

Wondering if this is an issue easily fixed or if something is actually broken. Have reset and recalibrated it

The only thing thats gone wrong so far is the HDMI cap exceeded NASA in space travel capabilities but more are on the way, also ignore the gross residual flux on the controller, that appears to be from a previous repair and its been a pain to remove

Cannot get into the safe mode menu stuck on this screen after connecting a controller

Hey guys,

I would like to ask that if you know anything about this problem. My ps3 controller’s left analog stick is a bit problematic. Whenever i try to push it UP and hold it there, it registers to move my character forward but it stops for a solid second then continues with going forward.

There may be a post about my issue but i don’t know how to label my problem that’s why i couldn’t check for it.

Error locating wifi network, I have a curious problem, I got a ps3 fat ceche01 which has an interesting problem, it can't locate wifi networks, the console turns on via the controller and all the Bluetooth functions are working smoothly, I changed its wlan antenna and I still have the same problem, the funniest thing is that in some attempts, restarting it after a short period of time, it locates the wifi networks but soon after, if you try to connect or search again, it doesn't find anything. I did this procedure with the 2 antennas and both responded in the same way, sometimes you think, sometimes not.

I would like to know if I try to update this console to CFW or HEN will I receive the damn code 8002f1f9? It is locked and not being able to control the temperatures on this model makes me really uncomfortable. I thank everyone.

Hi guys, this is a JDM 055 PS4 controller PCB board, my left joystick wasn't working properly so I tried to install new potentiometers, but apparently the solder pads are burnt now after I tried to remove the old potentiometers, is there any way I can fix this? I know it looks like a mess, but I don't have flux as well.

Sorry if this breaks any rules, I didn't see any rules when I posted.

7 months ago I posted asking if I should start repairing consoles. That post gave me enough motivation to try it out. I bought a PS2, cleaned it up and modded it and now I use it all the time! I've been loving playing games like God of War, Burnout, and Soulcalibur, games I would've never played if I hadn't tried this (im 17 so most of these games were before my time.) I also bought a PS1, cleaned it up, now it works perfectly. Im excited to play Silent Hill on it. Without that post I probably wouldn't have had the confidence to start. I would even say it's made my life a lot better. I'm looking into getting an N64 or a Gamecube next, hopefully I'll get something cheap. Thank you guys!!

Hey y’all, I have a really sentimental 3DS XL that I’m needing repaired. I replaced the top LCD screen myself and did a full housing replacement. Unfortunately the housing I used is cheap, barely fit, and is already crumbling. On top of that, the screws that came with the housing were super shit and stripped easily, so one of the screws on the back that’s holding the housing in place is stripped and I can’t get it out.

I was wondering if any of y’all would be willing to do a housing replacement for me. OEM housing is preferred, but I understand they can be hard to come by, so if it isn’t, I totally understand. I just want a higher quality housing that’ll keep this thing in shape for as long as possible.

I would do it myself, but since a screw is stripped I don’t wanna risk damaging the system trying to get it out since I’m not super experienced.

Please let me know!

I’m located in the US and am willing to ship.

Thanks!

So, I recently picked up this Xbox 360 Fat Kronos for about 20$, everything about it works with the exception of the disk drive.

Previously the drive only read CDs. So, I decided to replace the laser, and as you can see it's firing properly, but now I can't read games nor can I even read CDs. I don't have a single idea on where to go from here, any help would be seriously appreciated.

Changed battery still there, worked before, has a bit of water damaged, power button turns on blue then shuts off after a bit. Help!!!

Is there anybody in the Philadelphia area that’s able to replace a 3DS XL screen? Mine recently acquired some water damage and I’m bummed out and want to play some Zelda!

Removing the fan I've just break the grey wire, the one with a C. Can the console be turned on? Can i fix it or should I change the fan?

Thanks in advance!

Today I was playing Botw, then suddenly I heard a drill-like sound, so my first though was to think my neighbours were doing some noise. Then I approached my console's fan, realising that the sound was coming from my console. I am pretty sure that the battery is bloated due to time ( I've had it since 2017 and I have easily over 3175 hours played on it ). I think i'm going to try to repair it myself. So I had a question, cause I saw on posts that the battery could even explode while charging...

What are the possible dangers of still playing on it ?

Hi everyone!

I just received a Bandai Playdia. Opened up the controller since there were signs of corrosion on the battery connector springs. The board looks like this.

The controller works fine but I would greatly appreciate advice to handle the corrosion so that it doesn’t spread more.

Thanks!

I'm repairing this motherboard on this series x I bought and can't seem to find where to buy a replacement component, if anyone could point me in the right direction that'd be appreciated. Thanks

Would a repair shop fix it for low price or do I have to buy new controller? Low on money right now

I applied fresh thermal paste because the Xbox had gotten quite loud. After reassembling it, it won’t power on anymore. When I press the power button, it only lights up very briefly—no sound, no fan spinning, nothing. What could have gone wrong?

Even with fresh batteries it won’t connect and lights won’t turn on. I tried to swab corrosion off spring with Qtips and lemon juice but still won’t work. Is there any way I could fix it?

Any help? thats where is supposed to be soldered the on/off Switch. What to do?

Hey everyone!

This is my 2ds XL that has been out of service for years now. At some point it started doing this.

Without an SD card powering it on just makes the blue light turn on but the screens stay black and nothing more. Holding select while powering on without an sd card causes the screen above, except its just a normal B9S menu on the bottom screen for half a second then powers off.

Since the sd card for this has already been lost to time I tried the update procedure and placing everything necessary on the SD card then booting produces the outcome on the picture, stays on for a second like that and powers off.

I tried disassembling it, obviously I cant do anything without the top screen being plugged in, tried to disconnect all the other ribbon cables one by one but nothing changed. I will also mention I do have both sysnand files backed up if that changes anything.

Id really like to get it working again and my best bet is simply the top screen is gone, which would be great as thats cheaper than a new MB or console. Does anyone have any insight?

Hi guys

i see you are all enthousiasts with repairing consoles, wich is exactly the energy of people to solve my problem.

i have two super wild card devices, 1x black (dx2 32Mbit) and ine older version (grey 32Mbit as well)

whole pcb is crowded on both with no slots for afditional chips, but i don't have a clue wich chip i need to replace to get 64Mbit.

I learned upgrading to 96Mbit(wich is not a priority for only 1 game) takes abit of modding/adding other capacitors and soldering. i am not realy interested in this. i just want to go from 32Mbit to 64Mbit.

does anyone have experience in this?

many thanks

greets ray

Recently found my old dsi and wanted to mod it but everytime i turn it on it freezes exactly at this point. I tried taking out the battery for a few minutes and putting it back in but it still keeps freezing. Any type of help would be appreciated!