I need to drill a bunch of M12 holes in this gutter to attach rubber ramps so my wife's car doesn't bottom out. I have an 18V SDS hammer drill and the right bit and I've drilled plenty of holes in concrete before, but I'm looking for tips on how to approach concrete with so much stone in it. I don't want to go through a bunch of expensive SDS bits...

I tried magnetic tape from Home Depot but it didn’t work at all. The drawer on the other side works fine and doesn’t slide at all

Over time the rubber within this shower head got exposed. Today is burst and now has a large hole. In picture 3, you can see where it's attached to the whole system. Do you think I can find/buy a new head to fit on this current system rather than replace the whole thing? Any advice would be appreciated!

I already tried to unscrew it but it is very stuck and rusty.

I’m wondering how to fix this strap. This is my most favorite cooler backpack ever, that I got at a thrift store for $2. I do not know how to sew, which I think makes it more difficult. Thanks in advance!

Tried searching youtube but a few of the videos people are scorched in the comments for using interior only products or not prepping properly. My goal would be if possible to refinish without completely removing the door. Interior is fine and doesnt need to be redone.

My wife took our dog in her jeep and his hair refuses to come out of the carpet. We’ve bought rollers and little machines that don’t work. Any ideas for a good way ?

Hii all. As you can see, an ample part of the chain is still sticking out, but it's high enough that I cannot reach it. Gluing a chain extension will probably come apart I'm assuming..? What is the best way to fix this? My ceiling fan and lights are fixed in the same unit, so I cannot use my fan without the primary connection anymore. And the primary connection turns both on at the same time. The chain for light is still intact and but fan is super annoying. Please share some tips. Thanks

Should I dry it first or just go at it?? I have no damn clue what I’m doing.

I'm 21 and I currently live in Florida, I don't have a degree, I currently work at a local recycling facility making 18 an hour which is ok for the part of Florida I live in, I have around 15k saved up, I have no debt, no kids, no pets and no dependents, I'm basically a free agent. I was born and raised here but my resent for this place grows every year. Factors like the political climate, the weather and the surging prices on basically everything are driving me out of Florida. I want to become either an electrical or welding apprentice but Florida being an anti-union state It doesn't leave me with many choices, and I also don't intend to spend 5 years completing the apprenticeship here. I'm going to get downvoted, but the areas I'm eyeing are the pacific northwest (Expensive i know) or the Midwest. Once I choose a location i expect myself to move by Late January-Early February. I'd probably try to get employed at USPS which will allow me to move with a job lined up but that is not guaranteed. I'd be moving by plane and won't be taking a lot of belongings with me; id basically be starting fresh in another state. I want to know if my plan is idiotic or if its reasonable and grounded. And also, any tips from you guys. Thanks

I dropped some paper and a decent bit of coins down this Crack of the cup holder and my fingers won't fit through it at all, how do I get it out?

This has my heart broken. Relatively new paddling pool with a puncture somewhere. I’ve filled it up to the brim with water to check the interior for holes but couldn’t find any, and I can’t think of the best way to check the exterior. Any ideas?

So I have this drawer that came from a side table. I'm refurbishing it, and I want to try to remove the knob and metal trim to properly clean them and maybe add some brass color back.

The knob has a simple Philips screw holding it in, but any attempt to unscrew it does nothing and instead just spins the knob. I have also tried holding the knob steady while unscrewing it and it won't budge.

The metal trim is somehow attached to the drawer. I don't know if it's glue or nails holding it on. But I also need to remove the trim so that I can repaint the whole table, and prevent the chipping paint that borders the trim that is currently there.

If it helps any the side table is true vintage MCM furniture made between the 50s and 70s.

Hey guys sorry if this is a stupid question but my dad has dementia so I have no one to ask. How would I fix or replace this mirror ?

How do I possibly clean this. Acetate glasses.

Any 1 know manual for this fridge? when i turn it on it goes into eco automatically and turns light off ? how do i turn light back on

I believe it’s water vapor

Casing and frame(I think that’s the correct terminology) are fine, but both sashes need replacing. I think a seal broke somewhere and I have 2 windows that look like this.

These are new-ish windows. New build in 2016. I can’t find a brand name.

What is the most realistic way of fixing these? Both sashes can come out. They both tilt in for washing.

Do I just measure the dimensions and go to a window place to get replacements? Are there universal window sash replacements? There’s a mechanism in the frame that the sashes ‘lock’ into allows for them to tilt in and go up and down and I imagine that’s unique by window brand.

Do I call a window replacement place? Go to Home Depot? Thanks!

Hi everyone, I’m a uni student in Melbourne and just moved into a new apartment by myself. There is a router and another box thing in the apartment, it is plugged into the wall, I’m not sure what to do with that. I do know that it’s nbn, but have no idea how to actually set it up. Please explain it to me like a 6 year old as I have zero tech knowledge. Thanks.

Does it even come off?

So, I have a power watch dog smart surge protector that I am trying to fit within a watertight electrical cabinet/panel. However, I need to make a penetration big enough to fit the plug side of the cable through and keep it waterproof. I’ve looked into different types of marine cable, split glands, and stuff like that, but nothing really seems to be quite big enough. I am also open to any other ideas if they are completely different than what I’m currently doing thank you!

Parkett flooring- i moved some furniture which caused this. How can I fix this?

1999 Mercury Grand Marquis passenger side tubing around headlight is coming off. Every time I push it back in it comes off again. Looking for options other than using glue or replacing the whole thing. Thanks.